Hydrotester calibration and repair process

As with every good CLAAS machine, the Hydrotester also requires regular maintenance.

You can get this from our service partner, Hydrotechnik GmbH*.

  1. Contact the service team from Monday to Friday at the standard operating times (CET) in German or English:
    1. By phone: +49 (0) 64314004555
    2. E-mail: service@hydrotechnik.com
  2. You will then get an e-mail about how to proceed further. Please check your e-mail application's spam filter settings, if necessary.
  3. Once your implement has been examined, you will get a cost estimate before the maintenance or repair is carried out, which you can accept or reject. Should you decide against the repair, the implement will be sent back to you at your expense.
    However, we at CLAAS would like to point out that regular maintenance, to preserve the measurement accuracy of implements and sensors, is strongly recommended.

For further questions about calibration and repair, contact us at:
tsc.easy@claas.com

The following implements can be sent in for maintenance or repair.

Measuring device Frequency of checks Part Number
Hydrotester 5070 Every three years 00 0178 311 2
Hydrotester 5060 Every two years 00 0178 311 1
Hydrotester 3050 Every two years 00 0178 311 0
Sensors Frequency of checks Part Number
Measuring turbine Every two years 00 0178 322 x
600 bar pressure sensor Every two years 00 0178 314 x
60 bar pressure sensor Every two years 00 0178 315 x
-1 to 6 bar pressure sensor Every two years 00 0178 316 x
Temperature sensor Every two years 00 0178 324 x

*This process does not apply to implements within your warranty period.
Warranty claims must be made as usual via Service Online.